Ninja 250R Blaster-X Integrated Tail Light Programmable Ultra-Bright Kawasaki

Description

2008-2012 Kawasaki Ninja 250R Blaster-X Integrated LED Tail Light
High Performance Microprocessor Controlled Integrated LED Tail Light
Have a different model?
Click Here
to select your tail light.
This is a Manufacturer Direct Purchase! Purchase with confidence. Check out our
Feedback
!
This is an ultra-high intensity, high-performance Integrated LED Tail Light for the
2008, 2009, 2010, 2011 & 2012 Kawasaki Ninja 250R
with built in non-sequential yellow turn signals (
want sequential signals?
).
This product is a high quality complete plug and play unit with clear lens and OEM connectors (
want smoked lens?
). This product directly replaces the OEM tail light without any modification necessary. The lens quality is equivalent to the OEM unit it replaces.
The Custom LED 2008, 2009, 2010, 2011 & 2012 Kawasaki Ninja 250R Integrated LED Tail Light
features black "stealth" electronics and rear lens assembly for a smoked look, without any loss of performance!
The lens is optically clear, yet has a smoked appearance compared to standard integrated LED tail lights. This allows for visual appeal of a smoked tail light lens, without sacrificing any performance or safety that smoked tail lights certainly lose.
The Custom LED 2008, 2009, 2010, 2011 & 2012 Kawasaki Ninja 250R Integrated LED Tail Light features the 2nd Generation of our proprietary and patented
Blaster-X
technology
with multiple user-selectable
Brake Alert
patterns
and
Strobe Mode
! This tail light also features our new
Turn Alert
turn signal operation. With
Turn Alert
, the turn signal is significantly more distinguishable than with standard integrated led tail lights.
Brake Alert
automatically provides one of 11 user-selectable brake modulations the instant the brakes are applied. This alerts motorists the instant you apply the brakes - possibly saving seconds of reaction time for non alert motorists! The different modulation patterns can be user-selected VIA our new 2nd Generation Programming Interface! It can also be disabled completely if desired, for standard brake light operation.
NEW!
Turn Alert
is a NEW approach to our integrated LED tail light operation. Typically, and integrated tail light will switch between yellow and red on the side you are indicating a turn. This only creates a color contrast. With Turn Alert, the tail light cycles between full intensity yellow, and OFF, on that side. Therefore, there is a full contrast turn signal operation on that side. The red running light will resume on that side once the turn signal is canceled. If braking
and
turning, the red will illuminate fully in between blink cycles - because braking should have priority.
Strobe Mode
is a feature that puts the taillight into a devastating strobe cycle that is sure to get anyone's attention. This mode produces insanely bright pulses of light at ultra high frequencies, in alternating patterns across the tail light. Strobe mode is engaged by grounding a control wire, and can be engaged at any time.
Blaster-X
is our proprietary pulse-width-modulation (PWM) technology that squeezes the maximum possible illumination power out of LEDs. The result is a
significantly less expensive, yet even more outstanding and effective product than it's predecessors
- and widens our advantage over our competitors. Until you have seen a Blaster-X tail light in person, you will not fully understand the superiority of our tail lights.
NEW!
This product also marks the introduction of our
NEW 2nd Generation Programming Interface
which allows users to easily customize features of the tail light! The customizable features menu allows users to:
Enable or Disable the Startup Sequence.
Choose the Brake Alert pattern (can also disable Brake Alert).
Adjust the running light brightness within a preset range.
Adjust the brake light brightness within a preset range.
Engage Demo Mode, where the tail light cycles through all functions automatically and repeatedly!
Reset factory defaults
This programming interface is accessed very simply through the Strobe Mode control wire! The interface is designed to receive input simply by providing ground pulses to the strobe mode control wire. No special equipment is necessary to access and utilize the programming interface! Detailed programming instructions will ship with every unit.
NEW!
And last but not least, our Sure-Blink Technology. Our Integrated Tail Lights are designed to follow the turn signal commands of the motorcycles flasher relay. This insures it is compatible with all after market and OEM flasher relays - especially programmable relays such as our
ELFR-P
. However, in the event that the tail light receives a command to turn that does not break (blink) within a preset time period, the tail light will automatically blink that side. This feature is most useful in preventing common no-blink problems that are associated with retrofitting motorcycles to LEDs.
This high performance Integrated tail light utilizes 24 Ultra Bright Red LEDs and 24 Ultra Bright Yellow LEDs - compared to only one incandescent bulb in the stock tail light! These LEDs effectively handle the functions of: Running Light (red), Brake Light (red) and Turn Signals (amber) - all within the tail light housing!
Just as on the other Custom LED Integrated LED Tail Light models, the system is designed so that the red LEDs turn off (on the turn side) when the yellow LEDs come on, so that the turn indication is a pure and distinguishable yellow light. The unit automatically flashes between the red and yellow on the side you're turning! The Yellow LEDs are slightly offset as well, creating a dramatic attention grabbing effect.
The engineering is solid and dependable, the looks are unbeatable, and the brightness is incredible! Don't waste your time with half hearted solutions, do it the right way from the start, with Custom LED.
FEATURES
Plug-and-Play installation with OEM connectors (tail light AND turn signals).
OEM Fit with high quality clear lens (
want smoked lens?
).
24 Ultra Bright Red LEDs for running and brake lights.
24 Ultra Bright Yellow LEDs for turn signals.
Stealth black boards for inconspicuous appearance.
Custom LED ColorChange Technology on-board.
Custom LED Blaster-X PWM technology on-board.
Custom LED Strobe Mode!
Custom LED Brake Alert with multiple user-selectable brake modulations!
New 2nd Generation Programming Interface allows users to easily customize features!
New Sure-Blink Technology
New Programming Interface allows users to easily customize features!
New Sure-Blink Technology
Robust regulated design for consistent and reliable performance.
4 MHz microprocessor controlled operation.
24/7 customer support.
2-year
Warranty
&
Satisfaction Guarantee
!
MADE IN THE USA!
NOT DOT approved.
VIDEO
For Videos of our products, check out
Custom LED's YouTube Channel.
IMAGES
INSTALLATION
The Custom LED 2008, 2009, 2010, 2011 & 2012 Kawasaki Ninja 250R Plug-And-Play Complete Unit was designed to function as a direct replacement for the OEM tail light. The unit will install with exactly the same fit and electrical connectors as the OEM unit. No cutting, splicing or modifications what so ever.
There may be additional accessories required to correct blinker problems on your motorcycle if you remove your OEM turn signals. These accessories can not be built into the tail light, and are generally optional and specific to different customers needs, so they are sold separately. Please see the recommended accessories on our company website, and read about the general issues and solutions in our
Frequent Questions Page
. If you have any questions, please do not hesitate to
contact us
.
Installation of this product requires that you remove the OEM tail light from the motorcycle, and install this unit in its place. Please consult a qualified technician or your repair manual for the proper procedure to remove the OEM tail light.
Once the OEM tail light is removed from the motorcycle, installation of the Custom LED 2008, 2009, 2010, 2011 & 2012 Kawasaki Ninja 250R Blaster-X Integrated LED Tail Light is detailed in the instructions below.
click icon to download
Adobe Acrobat Reader is required to view this file.
If you are having problems viewing the file, please download the free software
here
250R Special Note:
The Ninja 250R blinker system is designed in such a way that the
OEM flasher relay will NOT blink without the OEM bulbs present
. Most bikes will just blink fast in this condition. The 250R will not blink at all. If you have not yet replaced your OEM relay,you should replace your OEM relay with our ELFR-1 QD Flasher Relay when considering our tail light, or any blinker modifications for that matter.
The ELFR-1 QD flasher relay will fix the blink speed for ALL blinker products on the motorcycle. You may or may not ALSO require the 250R No-Cut Diode Kit to prevent the 4-way blink problem, and to keep the turn signal indicator lamp in the gauge cluster functioning, when replacing the front AND rear OEM signals with LEDs.
WARRANTY
The Custom LED 2008, 2009, 2010, 2011 & 2012 Kawasaki Ninja 250R Blaster-X Integrated LED Tail Light Plug-And-Play complete unit comes with a FULL 2-Year Manufacturers Warranty against manufacturing defects! We will repair or replace any defects during this period. Even out of the warranty period, we can service this product because WE make it! This is the most reliable integrated LED tail light available, and is Made in the USA! We hand build each unit here at Custom LED. (note: warranty requires customer to send in the tail light for servicing. There are no in-service replacements offered with this warranty. Customer pays for shipping of product to Custom LED. We will cover the return shipping and any/all repair costs).
Honestly, this warranty is more of a piece of mind for our buyers than anything. We do not have failures with these units! They are designed properly, using the highest quality components and processes possible. Purchase with confidence.
CUSTOMER SUPPORT
We offer phone and E-Mail based customer support for all of our customers and even non-customers actually. Our entire business is handled through E-Mail and is handled very effectively. Our Engineers read every single email and answer them articulately. Typically, during normal business hours, E-Mails are answered within one hour. We can help you solve any problems you may encounter with the installation of this product, orany other product on your motorcycle!
APPLICATION LIST
2008 KAWASAKI NINJA 250R (EX250)
2009 KAWASAKI NINJA 250R (EX250)
2010 KAWASAKI NINJA 250R (EX250)
2011 KAWASAKI NINJA 250R (EX250)
2012 KAWASAKI NINJA 250R (EX250)
REQUIRED ACESSORIES
ELFR-1 QD Flasher Relay
RECOMMENDED ACESSORIES
Blaster-X Control Switch
No-Cut Diode Kit for Ninja 250R