MERCEDES BENZ SPRINTER Diagnostic Scanner Tool SRS ABS iCarsoft MB v2.0 MBII

Description

iCarsoft MB V2.0
Pro Multi-System Scanner Tool
The iCarsoft MB V2.0 is a professional fault diagnosis tool designed specifically for MERCEDES/SPRINTER/SMART vehicles.
It is an easy to use, stand alone unit that will have you scanning your vehicle within minutes. Simply, plug it into the OBD II port and the device will boot up with step-by-step instructions. This scanner has a large, easy to read 4 inch color display accompanied by a user friendly interface that requires no additional software.
As an added bonus, the scanner is equipped with full OBDII capabilities that allows you to scan all engine readings and related trouble codes (check engine light) on ANY vehicle make/model 1996 and newer.(U.S. only)
This tool is the newest version in the iCarsoft line of products and replaces the MBII. Features for the iCarsoft MB V2.0 include the following:
Oil/Service/Brake Service Reset Function
The iCarsoft 2nd Generation Diagnostic Tools allow you to reset Oil,Service, and Brake Lights in a click of a button on supported vehicles. On vehicles where a manual reset is required, the tool will guide you through the full process step-by-step.
Battery Management System (BMS)
Registers new battery to the BMS during battery replacement.
EPB Reset Function
Brake Pad / Shoe changes on vehicles equipped with EPB's (Electronic Parking Brakes) MUST be carried out using a Diagnostic Tool to correctly re-calibrate. The iCarsoft 2nd Generation Tools offer you that capability on supported models. De-activate to Service Position - Replace - Re-activate.
ECTS Reset Function
After cleaning or replacing the Electronic Throttle Body (ECTS), adaptation must be carried out (also the case if the negative terminal of the battery has been disconnected or when the Engine Control Unit has been replaced). The iCarsoft 2nd Generation Tools will perform Electronic Throttle Body adaptations on supported vehicles.
SAS Reset Function
The Steering Angle Sensor (SAS) is used to measure the angle of the steering wheel and the speed at which it is being turned. The signal is mainly used by the ABS System as part of it's stability control function but also by other systems such as ride level control and adaptive lighting. A problem with the SAS Signal will cause a fault with any of the systems that use the signal directly, or indirectly.
If the Steering Angle Sensor (SAS) needs to be changed, many vehicle's require the new sensor to be calibrated. The iCarsoft 2nd Generation Tool will allow you to carry out steering angle re-calibration on supported models.
DPF Regeneration or Replacement
Carry out a forced Diesel Particulate Filter (DPF) Regeneration on supported vehicles - this MUST be done by trained personnel. Required when the DPF filter blockage reaches levels where passive or active regeneration is unable to burn off the excess soot. The iCarsoft 2nd Generation Tool is also capable of adapting a new DPF Filter where supported.
Compatible Vehicles
(Please consult wikipedia.org if you are unsure of your body/chassis style, scanner will not work with your vehicle if it is not listed)
Mercedes Benz
A Class: W 168 , W 169 , W 176
AMG Class: 190
B Class: 245 , 246
C Class: 203 , 204 , 205
CL Class: 215 , 216
CLA Class: 117
CLC Class: 203
CLK Class: 209
CLS Class: 218 , 219
E Class: 207 , 211 , 212 , 213
G Class: 461 , 463
GL Class: X 164 , X 168 , X 166
GLA Class: 156
GLC Class: 253
GLE Class: 292
GLK Class: X 204
M Class: W 163 , W 164 , W 166 , 292
Maybach Class: 240
R Class: 251
S Class: 220 , 221 , 222 , 217
SL Class: R 230 , R 231
SLK Class: R 170(after 2001) , R 171 , R 172
SLS: C 197
SLR: Series 199
SMART
Smart Fortwo (A/C 450)
Smart Fortwo (C/A 451)
Smart Roadster (R/C 452)
Smart Roadster (W454)
SPRINTER
Sprinter – 901.6, 902.6, 903.6, 904.6, 905.6, 690, 906 (Up tp 2013)
Vaneo – (16 pin)
Vito/V-Class – Model Designation 638
Vito/Viano – Model Designation 639 (OBDII)
PROFESSIONAL MULTI-SYSTEM AUTO DIAGNOSTIC TOOL MB V2.0
FOR MERCEDES-BENZ/SPRINTER/SMART + OIL RESET +EPB+DPF+SAS+ETC+OBD II
iCarsoft MB V2.0 is a Professional and powerful vehicle fault diagnosis tool for Mercedes-Benz/Sprinter/Smart developed by iCarsoft Technology Inc. With a 4.0" TFT LCD and unique diagnostic software, it features full ECU diagnosis of single vehicle brand and test modes mainly include: CANBUS, ISO9141, KWP2000, and J1850 etc. It enables technicians to accurately diagnose complex problems.
① BACK BUTTON--Returns to previous menu.
② UP BUTTON--Moves cursor up for selection.
③ LEFT BUTTON--Moves cursor up for selection.
④ RIGHT BUTTON--Moves cursor down for selection.
⑤ DOWN BUTTON--Moves cursor down for seiection.
⑥ ENTER BUTTON--Confirms a selection(or action)
from a menu list.
⑦ HELP BUTTON--Shows help information for test
results or user operation
⑧ F1 FUNCTION BUTTON--In case of special use.
⑨ F2 FUNCTION BUTTON--In case of special use.
⑩ OBDII CONNECTOR--Connects the scan tool to
the vehicle's Data Link Connector via OBDII Cable.
⑪ STORAGE CARD SLOT--Holds the system of the
scan tool.
⑫ Data Cable CONNECTOR--Connects the scan tool
for power supply and update the software if needed.
PRODUCT FEATURES
1.iCarsoft MB V2.0 can do it all-reads and clears trouble codes on most of the systems such as engine,
transmission, ABS and airbag etc.
2.Support OBDII/EOBD Ten Modes of Operation
3.Read Live Data
4.Full ECU Diagnosis
5.Applies to the single Brand of most of the Models which equipped with OBDII-16 DLC
6.Easy To Use With Silicone Keys
7.Oil Light/Service Reset: Support service lamp reset.
8.Electronic Parking Brake (EPB) system maintenance deactivates and reactivates the EPB system for
replacement and initialization.
9.Diesel Particulate Filter (DPF) regeneration control system, requests the DPF regeneration process
while DPF blockage and turn off the DPF indicator.
10.Electronic Throttle Control system (ETC) relearns the throttle valve control value while clear or
replaces the throttle valve.
11.SAS: Steering Angle Sensor (SAS) calibration, calibrates the steering wheel to straight ahead, or
recalibrates SAS while steering part replacement.
12.The Print Data function allows you printing out diagnostic data recorded by the scan tool or
customized test reports.
13.Battery test allows you getting the voltage of battery with OBD port by
the scan tool when the engine starts.
14.DTC Library to lookup when user is operating this tool.
15.Upgrade Via PC
16.Multi-language: English, German, Dutch, Spanish, French.
FOURTEEN SUPER ADVANTAGES
Diagnose Single Brand of most Models (OBDII-16DLC)
Full System Diagnosis
Support Oil Service Reset
Electronic Parking Brake (EPB) system maintenance
Diesel Particulate Filter (DPF) Regeneration Control System
Electronic Throttle Control System (ETC)
Steering Angle Sensor (SAS) Calibration
Read &Clear DTC
Read Live Data
Support Battery Test
Support Data Review and Print
Full Speed Upgrade via Computer
4.0″ TFT LCD, 480*320 Pixels
Support Multi-Language
OBDII FUNCTION
1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicate whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data stream.
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission-related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most recently performed tests from the vehicle's on-board computer.
7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic monitoring tests for specific components/systems.
8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.
10. Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes
11.Turn off Check Engine Light (MIL), clear codes and reset monitors
12. Read live PCM DataStream
13. Support CAN (Controller Area Network) and all other
14. Multilingual menu and DTC definitions- English, Spanish, and German, etc.
15. Read pending DTCs
16. Read permanent DTCs
17. DTCs search
18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles
21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More
SPECIFICATIONS
Display: 4.0″ TFT LCD, 480*320 Pixels
Operation Temperature: 0°C ~ 50°C
Storage Temperature: -20°C ~ 70°C
Operating Voltage: 9 ~ 18V
Operating Current: 150mA@12V (Typical)
Power Consumption: 1.8W (Typical)
Dimension: 206*104.1*32.6 mm (L x W x H)
Contents:
MB V2.0 Main Unit
TF card (In the main unit)
Main Cable
Data Cable
User Manual
System coverage (for Mercedes Vehicles only):
*** Varies across year and model ***
Drivetrain
•
ME2.8 (6,8 cylinders) (Motor Electronics)
•  ME2‐SFI (Motor Electronics)
•  ME2.7 (Motor Electronics)
•  ME‐SFI (Motor Electronics)
•  ME‐SFI2.8 (Motor Electronics)
•  ECM (Engine control monolith)
•  CDI & CDI2 & CDI3 & CDI4 & CDI5 & CDI6 & CDID & CDI‐V1 (Common Rail Diesel Injection)
•  CDID3 (Motor electronics)
•  FTC (Front Transmission Control)
•  ETC (Electronic Transmission Control)
•  ESM (Electronic Selector Module)
•  TC/VG (Transfer Case)
•  ACS (Automatic Clutch System)
•  GRM (Gear Recognition Module)
•  AMG DRVU (AMG DRIVE UNIT)
•  DTR (Distronic)
•  FSCU/FSCU_EC (Fuel pump)
•  ISM (Shift module)
•  ME97 (Motor Electronics)
•  MED97(MotorElectronics)
•  MED177 (Motor Electronics)
•  SIM271DE20 (Motor Electronics)
•  SIM271KE20 (Motor Electronics)
•  SIM271KECNG (MotorElectronics)
•  SGR (Radar sensors control unit)
•  CDI60LS (Motor Electronics)
•  IRS‐HLA (Outer left rear intelligent radar sensor system)
•  IRS‐HRA (Outer right rear intelligent radar sensor system)
•  HAQ (Interwheel differential lock at rear axle)
•  MED40 (Motor electronics)
•  SG_EM
•  UFPCAMG ‐Comtrol unit 'Fuel pump'
•  BSA ‐ Belt‐driven starter/alternator
•  MED177_M157 (Motor electronics)
•  VGSNAG2 (Fully Integrated transmission control)
•  VGSFDKG (Electronic Transmission control for double‐plate clutch transmission)
•  VGS4NAG2 (Fully Integrated transmission control)
•  SCR ‐ Selective Catalytic Reduction
•  TC166‐Transfer case
•  MED177 AMG
•  ME2.7.2 (Motor electronics)
Chassis
•
ABS (Anti‐lock Brake System)
•  ESP (Electronic Stability Program)
•  BAS (Brake Assist System)
•  SBC (Sensotronic Brake System)
•  ABC/AIRmatic/ Suspension (Active Body Control)
•  VP (Vacuum Pump Brake Booster)
•  TPC/TPM (Tire Pressure Monitor)
•  EFB (Electric parking brake)
•  ES (Electrical power steering)
•  EPB (Electric parking brake)
•  ARS‐Roll control
•  ABR (Adaptive Brake)
Body
•
AB (Air Bag)
•  ATA (Anti‐Theft Alarm)
•  PTS (Parktronic System)
•  EIS (Electronic Ignition Switch)
•  SEM (Security Module)
•  PSE (Pneumatic System Equipment)
•  OCP (Overhead Control Panel)
•  LCP (Lower Control Panel)
•  SAM (Signal acquisition and actuation module)
•  SAM‐FL (Front left signal acquisition and actuation module)
•  SAM‐FR (Front right signal acquisition and actuation module)
•  SAM‐F (Signal acquisition and actuation module front)
•  UCP (Upper Control Panel)
•  HRA (Headlamp Range Adjustment)
•  HRA‐FL (Headlamp Range Adjustment, Front Left)
•  AAM (All Activity Module)
•  EAM (Extended Activity Module)
•  KG (Keyless Go)
•  RFL (Radio Frequency Locking)
•  VR (Vario Roof)
•  SVMCM /MSS (Special Vehicle Multifunction Control Module)
•  WSP(immobilizer)
•  AHE (Trailer Recognition)
•  RST (Roadster Soft‐Top)
•  RevETR‐LF (Left front reversible emergency tensioning retractor)
•  RevETR‐RF (Right front reversible emergency tensioning retractor)
•  CGW(Central gateway)
•  PSD (Panoramic sliding roof)
•  Dr‐side SAM (Driver signal acquisition and actuation module)
•  REAR SAM (Rear signal acquisition and actuation module)
•  SG‐FOND (Rear control unit)
•  WSS (Weight sensing system)
•  XALWA‐L (Xenon headlamp,left)
•  XALWA‐R (Xenon headlamp,right)
•  SDS (System diagnosis)
•  COU (Central operating unit)
•  CRN (Center roof node)
•  HBF (Rear control panel)
•  VBF (Front control panel)
•  BNS (Vehicle power supply control module)
•  SG‐DDW
•  BCG‐Remote control(Rear control field)
•  SRS (Supplemental restraint system)
•  EZS (Electronic ignition lock)
•  DSI (DIRECT SELECT interface)
•  VDS‐Vario roof control
•  MSC‐ (Magic Sky Control)
Information & Communication:
•  KI (Instrument Cluster)
•  ICM/IC (Instrument Cluster with Maintenance Interval Display)
•  SCM/SCCM (Steering Column Module)
•  DN (Dynamic Navigation by CTEL)
•  APS (Auto‐Pilot System)
•  DAS (Driver Authorized System)
•  NSA (Night View Assist)
•  MFK (Multifunction camera)
•  RFK (Backup camera)
•  ASSYST (Active Service System)
•  CM (Compass module)
•  ASSYST PLUS (PLUS Active Service System)
Seat Modules & Door Modules:
•  Seat Modules & Door Modules:
•  ESA‐FL (Electric Seat Adjustment, Front‐Left)
•  ESA‐FR (Electric Seat Adjustment, Front‐Right)
•  ESA‐REAR (Electric Seat Adjustment, Rear)
•  OSB‐FL (Orthopedic Seat Backrest, Front‐ Left)
•  OSB‐FR (Orthopedic Seat Backrest, Front‐ Right)
•  OSB‐REAR (Orthopedic Seat Backrest, Rear)
•  AIRSCARF (AIRSCARF system)
•  AMKS‐LF (Active multicontour seat)
•  AMKS‐RF (Active multicontour seat)
•  DSP (Pneumatic pump for dynamic seat)
•  ESA 'Front passenger' (Electric seat adjustment 'Front passenger')
•  ESA 'Driver' (Electric seat Adjustment 'Drive')
•  MKL‐HL (Rear left Multicontour backrest)
•  MKL‐HR (Rear right multicontour backrest)
•  DS‐LF (Left front dynamic seat)
•  DS‐RF (Right front dynamic seat)
•  HS (Seat heater)
•  ESA‐LR (Left rear electrical seat adjustment)
•  ESA‐LR (Left rear electrical seat adjustment)
•  LAE (Loading floor Automatically extendable)
•  ARWT (Automatic rear‐end door)
•  DCM‐FL (Door control module front left)
•  DCM‐FR (Door control module front right)
•  DCM‐RL (Door control module rear left)
•  DCM‐RR (Door control module rear right)
•  REDC (Rear‐end door closing control module)
•  TLC (Trunk lid control)
•  TSG‐ML
•  TSG‐MR
•  RCM (Rear control module)
•  HKS ‐ Tailgate control
•  KDS ‐ Trunk lid control
•  PWC (Partition wall control module)
Climate Control:
•  AAC/KLA (Automatic Air Conditioning)
•  REAR AC (Rear Air Conditioning)
•  STH (Stationary Heater)
•  LRH (Steering wheel heater)
•  EKMK ‐ Electric Refrigerant compressor
•  HSW (Heated steering wheel)
Shipping and Payment
Orders placed before 12pm PST will ship same day.  Otherwise, they ship within 24 hours.  Orders are shipped free of charge via USPS Priority Mail with tracking.  Payment only accepted through PayPal.
Returns
In the rare event an item is defective or damaged, returns will be accepted within 30 days of receipt or a replacement part will be shipped to you free of charge.
Contact Us
For questions or comments, please contact us through the ebay system by clicking "Ask a Question" found below.  Be sure to contact us if you are unsure whether this scanner will work with your vehicle.  You may also call or text Matt with questions 9am-6pm PST 5702six24806