LAUNCH X431 CRP129E OBD2 Scanner Engine ABS SRS AT TPMS SAS EPB Diagnostic Tool

Description

Note
:LAUNCH
CRP129E is
an upgraded version of CRP129
,
whether function or appearance, CRP129E is worthy
of your choice
The Different between  CRP129E , CRP129X and CRP129
【
LAUNCH CRP129E OBD2 Scanner Highlights
】
1.
OBD2 FULL FUNCTIONS
: LAUNCH CRP129E is one professional diagnostic tool with powerful function,
support obd2 full
function such as read and clear DTCs for Engine/ABS/SRS/Transmission, graph live data of
all system, evap system test.
Compared with general obd2 scanner, CRP129E add 5 special function.
2.
POWERFUL 4 SYSTEM SCAN TOOL
: CRP129E can do comprehensive diagnosis for Engine/ABS/SRS/
Transmission system,
and it built in over 3000 generic error code definitions, help you know
car problem
quickly.
3.
5 SPECIAL FUNCTIONS
: Based on CRP129, CRP129E add more 2 special function than CRP129.it supports
SAS/EPB/OIL/
TPMS/Throttle Reset.This allows for the simplification of car maintenance and services whilst also
enhancing the reliability of
the findings.
4.
EASY TO USE
: CRP129E is one 5 inch touch screen obd2 scanner, equipped with android system and A5
quad-core processor,
8GB ROM, high-speed diagnostic and feedback, it is like our mobile phone, very easy to
use for every person.
5.
CONVENIENT BUTTON
: LAUNCH CRP129E have one-click update online button, one-click read I/M
readiness button, one-click
screenshot, one-click identify VIN, one-click read diagnostic report, and you can
print the report by sharing it to pc.LAUNCH
CRP129E is advanced version of LAUNCH CRP129 and LAUNCH
X431
Creader VIII.
6.
Multilingual Support
:
English, French, Spanish, Russian, Japanese, German, Italian, Portuguese,Korean
7.
Auto VIN and Report
:Compare with CRP123, CRP129,it can automatic identify VIN code. Also ,It can
automatically generate
diagnostic reports and upload it.
8.
Support battery voltage detection
.
9.
One-Click Update Scan Tool with Touch Screen directly and Lifetime free Update
.
【
LAUNCH
CRP129E
Supports
4
Systems
Diagnosis
and
5
Special Reset
Functions
】
For Engine System
:
It can help detect the engine ignition, fuel injection, air and fuel ratio, and exhaust emission
conditions in Engine system to enhance vehicle performance, save energy and reduce exhaust emission.
For Transmission
:
It can figure problems out via reading codes in the Transmission system, or check the health status
via live data viewing.
For ABS System
:
It retrieves ABS codes to tell you where the problem is with a visual inspection of all brake components.
For SRS System
:
It can detect every electronic parameter to check SRS system’s health status.
Oil Reset
:
It can perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depend
on the vehicle driving conditions and climate, and to turn off the warning light.
EPB Reset
:
It is fitted with an Electronic Parking Brake (EPB) release, which is rather less labor intensive and therefore
is an epitome of a modern motor vehicle accessory.
SAS Reset
:
It can calibrate the steering angle sensor after the replacement to make sure the ECU issued the correct
steering instructions and memorize the max angle’s position.
Throttle Matching
：
ensure communication with ECU after replacement
TPMS Service
：
perform TPMS programming and reset procedures after tire sensors are replaced
【
LAUNCH CRP129E supports
FULL OBD2 Functions OF ENGINE SYSTEM
】
1.
Reading Codes
: Show the detailed description of the Diagnostic Trouble Code (DTCs)
2.
Erasing Codes & Reset
: Turns off Check Engine Light (MIL), clears codes and resets monitors.
3.
Data Stream
: Reads and displays live ECU/PCM data stream, plotting functions graphically and stores freeze frame data.
4.
I/M Readiness Status
: Shows whether the various emissions-related systems on the vehicle are operating properly and
are ready for inspection and maintenance testing.
5.
Read Live Data Stream
: Show the information of continuous data stream from a vehicle in live graphic (waveform) display.
6.
View Freeze Frame Data
: Check the certain vehicle conditions which are recorded by the on-board computer at the time
the emission-related fault occurs.
7.
O2 Sensor Test
: Allows retrieval and viewing of O2 sensor monitor test results for the most recently performed tests from
the vehicle’s on-board computer.
8.
On-Board Monitor Test
: Retrieves and displays test results for emission-related powertrain components and systems.
9.
Read Vehicle Information
: Display the information such as VIN (Vehicle Identification Number), CID (Calibration ID) and
CVN (Calibration verification number), etc.
10.
Component Test
: Certain vehicle components can be actuated by commands sent from the scanner to test their operability.
【
Upgraded Version Of LAUNCH CRP129
】
One-click Wifi Free Update:
You only need to update the scanner’s software to the latest versions with one single click via
WiFi
connection, to extend its using life and ensure the data is accurate.
No Flash back Android System:
The Android system of CRP129E completely solves the flash back problem of other scanners.
The 5-inch touch screen is the upgrade of CRP129
（
3.5-inch
）
.
10h Battery Life:
It comes with 6100mAh faster charge battery ,
it's easy for you to view the data flow anytime and anywhere.
Auto VIN
:
Compare with CRP123, CRP129,it can automatic identify VIN code.
Health reports and screenshots:
The vehicle diagnostic reports can be recorded, stored, played back and printed.Screenshot
function can record history.
Graphing battery get early warning:
This OBDII scanner can display the instantaneous voltage across the battery terminals
in a graphical way. This helps you to get early warnings for possible battery and the charging system problems.
Software Upgrade:
LAUNCH CRP129E not only can work on 1996 and newer cars, but also can work on cars before 1996.
Vehicle diagnostic Report:
Once CRP129E and the vehicle are properly connected, the system starts auto-detect process a
diagnostic report will be automatically generated and sent to your email box (if bound)
Diagnostic History:
This function provides a quick access to the tested vehicles and users can choose to view the test
report
or resume from the last operation, without the necessity of starting from scratch.
Diagnostic Feedback:
Use this option to submit the vehicle issue to us for analysis and troubleshooting.
DTC Library:
Allows you to retrieve the definition of the diagnostic trouble code from the abundant DTC database.
9 Languages Supported:
English, French, Spanish, German, Russian, Italian, Polish,Portuguese and Korean.
【
Share
and
Print
Your
Diagnostic
Report
】
You can generate a 4 Basic System Diagnostic Report by ONE-CLICK.
LAUNCH CRP129E obd2 scanner can [
list the car
modules and mark the normal and abnormal part in different colors ].
You can see the status of the car modules.The reports
can be [
Emailed/Print ]
to the office or directly to your customer.
【
LAUNCH
CRP129E
supports
O
ve
r
10000
Car
Models,
Up to 57 Brands
】
【
Item
Parameter
】
Screen: 5 touch screen
RAM：1G
ROM: 16GB
Battery: 6100mah rechargeable Li-battery
OBDII input voltage range: 9-18V
Charging via
・DC 5V charging cable or
・Diagnostic cable through connection to vehicles DLC
Dimension: 228mm x 125mm x 34. 5mm
Working temperature:
0-50°C
Storage temperature:
-20 to 70°C
【
Packing
List
】
1 x
Creader Professional
CRP
129E handset
1 x
OBD diagnostic cable
1 x
DC 5V charging cable
1 x
User manual
1 x
Carrying bag
1 x
Free TPMS Tool EL-50448