Gunite Pool Paint Primer (A7725)

Description

SMOOTH OUT THE ROUGH SPOTS!
Two-part epoxy primer used for fiberglass, rough plaster, rough concrete, new gunite or sandblasted surfaces.
Gunite Primers heavy viscosity acts as a full coat to provide a smooth surface.
Coverage: Approximately 100-150 sq ft per gallon.
or surface preparation, wash the pool with Tri-Sodium Phosphate. DO NOT use a soap-type detergent. It can leave a film on the surface which will result in poor paint adhesion.
Acid etching is required on bare masonry surfaces like concrete or plaster. It is also effective for removing chalky residue and hard mineral deposits on a previously painted pool.
We highly recommend repeating STEP 1: Wash the surface again with the tri-sodium phosphate solution to neutralize any remaining acid on the surface.
This product is not
Powered by
Frooition
Home
Pools
Cleaners
Pumps
Filters
Parts
Chemicals
Gunite Pool Paint Primer (A7725)
SKU: 400181
Gunite Pool Paint Primer (A7725)
SKU: 400181
Item Description
SMOOTH OUT THE ROUGH SPOTS!
Two-part epoxy primer used for fiberglass, rough plaster, rough concrete, new gunite or sandblasted surfaces.
Gunite Primers heavy viscosity acts as a full coat to provide a smooth surface.
Coverage: Approximately 100-150 sq ft per gallon.
or surface preparation, wash the pool with Tri-Sodium Phosphate. DO NOT use a soap-type detergent. It can leave a film on the surface which will result in poor paint adhesion.
Acid etching is required on bare masonry surfaces like concrete or plaster. It is also effective for removing chalky residue and hard mineral deposits on a previously painted pool.
We highly recommend repeating STEP 1: Wash the surface again with the tri-sodium phosphate solution to neutralize any remaining acid on the surface.
This product is not returnable after purchase. For details, please refer to our
Return Policy
.
Q: What kind of surfaces should you use the Gunite Primer on?
- The Gunite Primer should be used on Fiberglass, Rough Plaster, New Gunite or Sandblasted surfaces.
Q: Should I use a primer with the Super Poxy Paint?
- The manufacturer does recommend priming the pool for proper adhesion.
Q: Can this be applied to a wet surface?
- Unlike Epoxy Primer, Gunite Primer can only be applied to a completely dry surface.
Q: How much paint do I need?
- Each gallon will cover approx. 100-150 sq ft, depending on porosity and roughness of surface and how thickly the primer is applied.
Shipping Restrictions:
Due to various regulations, this product cannot be shipped to certain states or zip codes. If you provide a shipping address for one of the following states or zip codes, your order will be canceled and the item will not be shipped.
Restricted States:
AK,HI,PR,GU,VI
Restricted Zip Codes:
43436, 43438, 43446, 43456, 49757, 49782, 90704, 98222, 98243, 98245, 98250, 98261, 98279, 98280, 98286, 98297
Related Items
More Items!
View more great items
Six Port Water Valve Module with Base O-Ring 004-302-4408-00 Paramount
&dollar249.99
Lamotte Salt, TDS, Temperature Tracer PockeTester (1749)
&dollar173.84
In The Swim Brand Pool Clarifier - Clear Cloudy Water Fast
&dollar17.99
S.R. Smith TurboTwister Complete Pool Slide
&dollar4,889.98
Powered by
Frooition
Frooition | No-js Template | eBay design, eBay store design, eBay shop design, eBay template design, eBay listing design (ver:froo_no_js)
This listing is currently undergoing maintenance, we apologise for any inconvenience caused.