-40%
Gallon Kirker Enduro Prime 2.1 VOC DTM Epoxy Gray Primer EP611 - Car Repair

Gallon Kirker Enduro Prime 2.1 VOC DTM Epoxy Gray Primer EP611 - Car Repair

$ 41.17

Availability: 136 in stock
  • California Prop 65 Warning: Cancer and Reproductive Harm
  • Items Included: Primer
  • Non-Domestic Product: No
  • Refund will be given as: Money Back
  • Returns Accepted: Returns Accepted
  • Type: Epoxy Primer Gray
  • Country/Region of Manufacture: United States
  • Manufacturer Part Number: EP611
  • Manufacturer Color Name: Gray
  • Primary Color: Gray
  • Return shipping will be paid by: Seller
  • Item must be returned within: 30 Days
  • Custom Bundle: No
  • Brand: Kirker Automotive Finishes
  • Color: Gray
  • Modified Item: No
  • Condition: New
  • Country of Manufacture: United States
  • Restocking Fee: No

    Description

    Listing Template 2018
    Home
    About Us
    Shipping
    Returns
    View Feedback
    Contact Us
    Gallon Kirker Enduro Prime 2.1 VOC DTM Epoxy Gray Primer EP611 - Car Repair
    The Kirker Enduro Prime Epoxy Primer is a two-component epoxy primer known to be free of isocyanates and lead chromate. This primer shows exceptional adhesion qualities and tremendous resistance to corrosion. It dries quickly and retains color much longer. Available in gray, white, and black colors in one quart and one gallon sizes, this epoxy primer is made in the USA.
    This epoxy primer provides a strong and durable foundation for partial and total repair work. Suitable for application on a variety of substrates such as fiberglass, body fillers, aluminum, prepared steel and factory finishes, this epoxy will not lose its quality when you sand it after 2-3 days of application.
    How to prepare the surface for using the Kirker Enduro Prime Epoxy Primer
    Sand surface to remove rust or to neutralize any traces of oxidation.
    Remove all traces of wax, silicone, oil and grease with detergent wash. Follow it up with a solvent wash.
    Abrade substrate with 180 grit sandpaper and re-clean with final wash cleaner.
    If you want to enhance adhesion to bare metal, a chemical pre-treatment will help.
    Factory finishes will go through these same steps of surface preparation except that they need to be abraded with 320-400 grit sandpaper.
    How to use the Kirker Enduro Prime Epoxy Primer
    Mix this epoxy primer with the epoxy catalyst in a 1:1 ratio. It does not require any induction time.
    Catalyst sold Separately.
    Mix only as much primer as you require to finish the immediate repair job.
    Use one of the spray gun types from conventional siphon feed, conventional gravity feed, and HVLP. Refer to the manufacturer’s specifications for tip size and air pressure.
    Apply one or two wet coats, depending on the desired film build. Leave a flash time of 30 minutes between coats.
    Allow Enduro Prime to stay for 30 minutes before applying the topcoat. When you apply two coats, you need to wait for 45-60 minutes before the topcoat.
    Key Features of the Kirker Enduro Prime Epoxy Primer
    Simple 1:1 mix ratio with catalyst
    Does not require any induction time
    Cures fast, fills pits on metal, and can be easily sanded
    Long lasting and resistant to corrosion
    Shows wonderful adherence to bare metal and other substrates
    Gray
    Sold in quart or gallon sizes
    ABTM part number: KIRK-EP-611
    Note: This product requires a catalyst.  Catalyst is sold separately.
    Auto Body Toolmart has been serving the Automotive Industry for over 30 years. Buy with confidence.
    About Us
    Based in United States, autobodytoolmart has been an eBay member since Jul 03, 2000
    Feedback
    We will always help you to have a 100% positive happy buying experience. Contact us if you are unhappy about any aspect of your purchase from us. We only want five star feedback from you so buy with confidence.
    View Our Categories