Epoxy Fast Dry 2.1 low voc DTM Primer & Sealer Black Gallon Kit,

Description

This sale is for a gallon of fast dry black 2.1 lbs/gallon voc epoxy primer (SMR-260B) and a quart can of epoxy catalyst (SMR-261).
The SMR-260 is 2.1 lbs/gallon voc and compliant everywhere.
The SMR-260 is a fast dry, easy sanding 2K epoxy primer with great color and gloss holdout.
- Easy 4:1 mix primer with optional 5-10% reduction with 0 voc reducer (SMR-0075)
- Excellent adhesion and corrosion resistance
- Can be used as a primer and a sealer
- Great adhesion to Steel, Aluminum, Fiberglass, Body fillers and Existing finishes
- Lays down super smooth at 4:1 or with optional 5-10% 0 voc reducer (SMR-0075)
- True 2K epoxy, no unreacted polymers
SURFACE PREPARATIONS
Clean surface with a Wax and Grease Remover. Sand metals or old paint with 180-220 grit and re-clean.
SPRAY GUN SETUP
HVLP Gun: Fluid Tip 1.3-1.6 mm, Spray Pressure 8-10 psi
APPLICATION
Epoxy Primer should be applied in medium wet coats, with a 10-minute flash period between each (at 70 °F). One to two coats is enough to achieve the desired dry film thickness. Epoxy primer may be topcoated after approximately 30 minutes per coat, or up to about 3 days. After three days, the primer MUST be sanded prior to topcoat application.
SAFETY