5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solids

Description

5500 Polyaspartic Polyurea Coating Roll Down Low Temp 30°F | 87% Solids
5500 Polyaspartic Roll Down
5500 Polyaspartic Coating offers a beautiful, decorative finish while providing a tough durable surface. The 5500 is a low temp waterproof coating, 87% solids, 2 component, aliphatic pure polyurea slow system roll down, self priming for easy application (apply with squeegee then backroll) that can be applied down to 30F. (Note: Recommend using the Fast Set version in cold weather due to slower set times).
Color retention and high chemical resistance with excellent adhesive properties. Highly resistant to staining, tire marking (most tires) and formulated to be color stable, abrasive resistant, non-brittle, flexible, quick set with good impact resistance.
Quick back-in-service times. 5500 fast set version can be walked on in 1 - 2 hours (at 75F). 5500 Polyaspartic Coating can be used as a stand alone system or topcoat to other high performance flooring systems. Available high gloss clear or color. We offer the 5500 Fast Set 20 min (recommended especially for cooler temp down to 30F surface/air), the 5500-EX Slow Set 30 min and the 5500-HH slow set 30 min recommended specifically for high humidity & warm climates, Florida-like).
For projects requiring a primer, suggest the
7001 Polyurethane
which is a quick cure, single component for both concrete and steel projects and is an excellent companion to the 5500.
For a colorful look, we offer
1/4" vinyl chips
in pre-mixed blended or individual colors. Broadcast chips into a colored 5500 base coat then add clear 5500 top coat.
5500 Polyaspartic Coating coverage rate based on how thick applied. The 5500 at 87% solids, very little lost after it evaporates (compare to 50% solids product from big box stores which lose 1/2 coating to evaporation). For 5 mil thick application, 5500 coverage rate 275 sq'/gallon or 550 sq' total area with 2 gallon kit when used as a basecoat for basements or light foot traffic only projects. For garage projects, recommend 10 mils minimum base coating thickness. Each 2 gallon kit covers 275 sq' at 10 mils thick. Can apply up to 10-12 mils thick in a one coat application.
For larger 2 coat projects when using chips/flakes, save money using colored 5500 as basecoat (can broadcast chips/flakes into the basecoat) and clear 5500 as topcoat. Using a clear topcoat over a colored basecoat also adds depth to the visual appearance and enhances the look. Can save even more money on a 2 coat system using our
6009 Epoxy
100% solids as the basecoat and the 5500 Polyaspartic as clear topcoat.
Colorant
When choosing color, colorant shipped separately for mixing into Part A prior to use. Use 10-12 oz colorant to color 1 gallon 5500. If you want
Additional Pigment
beyond what comes with the 5500, quart containers of 7 different 5500 pigment colors are sold separately if desired. One quart pigment will color 2-3 gallons of 5500 Polyaspartic. Use 10-12 oz pigment per blended gallon of 5500 for most colors. If using white, add 12-14 oz pigment per blended gallon of 5500.
Do not use other pigments with the 5500 as they are not formulated with the proper base materials that are compatible with the 5500. Do not overload the 5500 with pigment, use the minimum amount of pigment for the desired affect.
When using the 5500 as a basecoat on a porous surface and adding pigment, can add up to 4 oz Xylene per mixed gallon 5500 to help with dispersion of the pigment and with penetration into the substrate. Do not recommend adding Xylene otherwise.
Where is 5500 Polyaspartic used?
Decorative Floor Finishes
Garage floors, basements, offices, showrooms, kitchens
Industrial Floor Coating
Water Feature Applications
Clear Top Coat For Color Chips & Colored Quartz
Concrete Slabs, Stairs and Pedestrial Walkways
Decks, Wood Structures
Interior & Exterior Applications
Concrete & Wood Countertops
Why 5500 Polyaspartic Coating?
Beautiful Clear Appearance
Quick recoat time in as little as 1 - 1.5 hours
Waterproofing Elastomeric Systems
Good In Submerged Service Projects Like Fountains
Works well on concrete, brick, steel, wood, fiberglass
Outstanding Chemical Resistant
Excellent Abrasive Resistance
Highly Adhesive
Self Priming With No Primer Required
Excellent Non-Yellowing UV Resistance For Very Clear Finish
Conforms to the USDA requirements for incidental food contact
Versatile Options: Fast or Slow Set, High Heat & Humidty
Cold Weather Apply Down to 30F Using Fast Set Option
Good Elongation
Polyurea performance in an easy to apply roll down formula. Read:
basic installation guidelines
TECHNICAL DETAILS
Solids
87%
Color
Clear, Leather Tan, Light Gray, Medium Gray, Dark Gray, White - Colored pigment shipped separately to be added to 5500 Clear. Use 10-12 oz pigment per gallon. For White color add 12-14 oz pigment per gallon.
Hardness ASTM D2240
Shore A 85 & 50D
Gel time
20 min @75°F
Recoat Time
1 to 2 hours or as soon as can walk on it same day. If re-coat window exceeded, sand lightly to produce a profile, wipe with acetone and re-coat.
Compressive Strength
8 hrs – 7300 psi, 24 hrs – 11,200 psi, 7 days – 14,000 to 19,000 psi
Mix ratio
1:1 Mix while adding Part B to A using Jiffy Mixer slow speed 1-2 min
Application method
Squeegie followed by backroll short nap 1/4″ to 3/8″ roller
Surfaces Applied to
Concrete, metal, wood, steel, tile
Application range
35°F to 90°F
Abrasion (CS17) ASTM D4060-90
4.0mg/1000/500cycles
Tensile ASTM D412
>4000 psi
Tear Strength ASTM D470
850 lbs/in
Elongation ASTM D124
120%
Processing Temperature
70°F
Viscosity @25°C cps
450 +/-50
VOC
0%
UV Resistance
High
Maximum mils per coat
10-12 mils DFT
Concrete cure time
Minimum 28 days after new pour
Chemical Cure
Tack free in 1 to 1.5 hours and full cure in 24 – 48 hours @70°F
5500 CHEMICAL RESISTANCE
+ POSITIVE RESULTS -NEGATIVE RESULTS
24 HOURS YELLOWING
7 DAYS YELLOWING
10% Acetic Acid
+
– yellowing
100% Ethanol 200 proof
+
+
50% Sulfuric Acid
+
+
38% Hydrochloric Acid
+
+
10% NaCl
+
+
28% Amonia
+
+
85% Lactic Acid
+
– down gloss
5% to 10% Chlorox Bleach
+
+
Citrus Cleaning Solvent
+
– slight blisters
Skydrol PE-5
+
+
Power Steering Fluid
+
+
Transmission Fluid Dextron
+
+
Motor Oil
+
+
Brake Fluid
+
– slight blisters
Unleaded Gasoline
+
+
MEK
–
–
Xylene
–
–
Tap Water
+
+
Coffee
+
+
Cola
+
+
Grape Juice
+
+
Ketchup
+
+
Mustard
–
– transient yellowing
Set Time
Color
Size
Price
HH High Humidity 30 Min
Clear
1 Gallon (Part A Only - Clear)
$
148.50
EX Slow Set 30 Min
Clear
1 Gallon (Part A Only - Clear)
$
148.50
Fast Set 20 Min
Clear
1 Gallon (Part A Only - Clear)
$
148.50
HH High Humidity 30 Min
Clear
1 Gallon (PART B ONLY)
$
148.50
EX Slow Set 30 Min
Clear
1 Gallon (PART B ONLY)
$
148.50
Fast Set 20 Min
Clear
1 Gallon (PART B ONLY)
$
148.50
HH High Humidity 30 Min
Wheat (Light Tan)
10 Gallon Kit
$
1,259.50
HH High Humidity 30 Min
Wheat (Light Tan)
2 Gallon Kit
$
297.00
EX Slow Set 30 Min
Wheat (Light Tan)
10 Gallon Kit
$
1,259.50
EX Slow Set 30 Min
Wheat (Light Tan)
2 Gallon Kit
$
297.00
Fast Set 20 Min
Wheat (Light Tan)
10 Gallon Kit
$
1,259.50
Fast Set 20 Min
Wheat (Light Tan)
2 Gallon Kit
$
297.00
HH High Humidity 30 Min
Leather Tan
2 Gallon Kit
$
297.00
EX Slow Set 30 Min
Leather Tan
10 Gallon Kit
$
1,259.50
EX Slow Set 30 Min
Leather Tan
2 Gallon Kit
$
297.00
Fast Set 20 Min
Leather Tan
10 Gallon Kit
$
1,259.50
Fast Set 20 Min
Leather Tan
2 Gallon Kit
$
297.00
HH High Humidity 30 Min
Leather Tan
10 Gallon Kit
$
1,259.50
EX Slow Set 30 Min
Medium Gray
10 Gallon Kit
$
1,259.50
HH High Humidity 30 Min
Medium Gray
2 Gallon Kit
$
297.00
EX Slow Set 30 Min
Medium Gray
2 Gallon Kit
$
297.00
EX Slow Set 30 Min
Light Gray
10 Gallon Kit
$
1,259.50
Fast Set 20 Min
Medium Gray
2 Gallon Kit
$
297.00
Fast Set 20 Min
Light Gray
10 Gallon Kit
$
1,259.50
HH High Humidity 30 Min
Dark Gray
10 Gallon Kit
$
1,259.50
HH High Humidity 30 Min
Light Gray
2 Gallon Kit
$
297.00
EX Slow Set 30 Min
Dark Gray
10 Gallon Kit
$
1,259.50
EX Slow Set 30 Min
Light Gray
2 Gallon Kit
$
297.00
Fast Set 20 Min
Dark Gray
10 Gallon Kit
$
1,259.50
Fast Set 20 Min
Light Gray
2 Gallon Kit
$
297.00
HH High Humidity 30 Min
Dark Gray
2 Gallon Kit
$
297.00
HH High Humidity 30 Min
Clear
10 Gallon Kit
$
1,149.50
EX Slow Set 30 Min
Dark Gray
2 Gallon Kit
$
297.00
EX Slow Set 30 Min
Clear
10 Gallon Kit
$
1,127.50
Fast Set 20 Min
Dark Gray
2 Gallon Kit
$
297.00
Fast Set 20 Min
Clear
10 Gallon Kit
$
1,127.50
Fast Set 20 Min
Clear
2 Gallon Kit
$
253.00
HH High Humidity 30 Min
Black
10 Gallon Kit
$
1,259.50
HH High Humidity 30 Min
Black
2 Gallon Kit
$
297.00
EX Slow Set 30 Min
Black
10 Gallon Kit
$
1,259.50
EX Slow Set 30 Min
Black
2 Gallon Kit
$
297.00
Fast Set 20 Min
Black
10 Gallon Kit
$
1,259.50
Fast Set 20 Min
Black
2 Gallon Kit
$
297.00
Fast Set 20 Min
Medium Gray
10 Gallon Kit
$
1,259.50
HH High Humidity 30 Min
White
2 Gallon Kit
$
297.00
HH High Humidity 30 Min
Light Gray
10 Gallon Kit
$
1,259.50
EX Slow Set 30 Min
White
2 Gallon Kit
$
297.00
Fast Set 20 Min
White
2 Gallon Kit
$
297.00
HH High Humidity 30 Min
Clear
2 Gallon Kit
$
253.00
EX Slow Set 30 Min
Clear
2 Gallon Kit
$
253.00
HH High Humidity 30 Min
Medium Gray
10 Gallon Kit
$
1,259.50
Fast Set 20 Min
White
10 Gallon Kit
$
1,259.50
EX Slow Set 30 Min
White
10 Gallon Kit
$
1,259.50
HH High Humidity 30 Min
White
10 Gallon Kit
$
1,259.50
Shipping
Shipping cost:
No cost shipping lower 48 US States FedEx Ground
Delivery time:
Delivery 1 to 5 days after shipment depending on location
Payment
We accept the following payment methods:
PayPal payment due at time of order placement
Please contact us if you have any questions.
Service
PLEASE CONTACT CUSTOMER SERVICE FOR QUESTIONS